Picture Screen Adjustment - Sanyo PLV-WF10 Owner's Manual

Sanyo owner's manual multimedia projector plv-wf10

Hide thumbs Also See for PLV-WF10:

Specifications (1 page)

Service manual (133 pages)

Table Of Contents

Table of Contents

VIDEO INPUT

Store

To store adjustment data, move a red frame pointer to Store icon

and press SELECT button. Image Level Menu will appear.

Move a red frame pointer to Image Level 1 to 4 and then press

SELECT button.

Other icons operates as follows.

Reset

Reset all adjustment to previous figure.

Quit

Closes IMAGE MENU.

This projector has a picture screen resize function, which enables you to display desirable image size.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button(s) to move a red frame pointer to

SCREEN Menu icon.

Press POINT DOWN button and move a red frame pointer to

function that you want to select and then press SELECT button.

Full

Provides image to fit width of screen by expanding image width

uniformly. This function can be used for providing a squeezed video

signal at wide video aspect ratio of 16 : 9.

When your video equipment (such as DVD) has 16 : 9 output mode,

select 16 : 9 and select Full on this SCREEN Menu to provide better

quality.

Zoom

Provides image to fit screen size (16 : 9 aspect ratio) by expanding

image width and height uniformly. This function can be used for

providing a letter box mode picture (4 : 3 aspect picture with black

bar on top and bottom edges) at wide video aspect of 16 : 9.

Normal

Provides image at the normal video aspect ratio of 4 : 3.

Natural wide

Provides image to fit width of screen by expanding both sides of

image. This function is suitable to provide a normal video signal (4 :

3 aspect ratio) at wide video aspect ratio of 16 : 9.