Picture Freeze Function; No Show Function; P-Timer Function - Sanyo PLV-WF10 Owner's Manual

Sanyo owner's manual multimedia projector plv-wf10

Hide thumbs Also See for PLV-WF10:

Table of Contents

Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE

button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button.

Press NO SHOW button on Remote Control Unit to black out a image.

To restore to normal, press NO SHOW button again or press any other

button except POINT / SELECT / RIGHT CLICK / LASER button.

Press P-TIMER button on Remote Control unit. Timer display "00 : 00"

appears on a screen and timer starts to count time (00 : 00 ~ 59 : 59).

To stop P-TIMER display, press P-TIMER button. And then, press P-TIMER

button again to cancel P-TIMER function.

PICTURE FREEZE FUNCTION

BASIC OPERATION

No show

Message disappears after 4 seconds.

Table of Contents