Connecting To A Computer - Sanyo PLC-XW200K Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio cable
(stereo)
Note:
• Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT IN
and the COMPUTER IN 2/MONITOR OUT terminals as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN and
not the COMPUTER IN 2/MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting
cables.
14
Monitor Input
or
Monitor
Monitor Output
Output
VGA VGA
cable cable
COMPUTER IN 1
COMPUTER IN 2 /
/ S-VIDEO IN
MONITOR OUT
/COMPONENT IN
AUDIO IN
This terminal is switchable.
Set up the terminal as
either Computer input or
Monitor output. (See Page
49.)
AUDIO OUT
(stereo)
External Audio Equipment
Audio Input
Audio cable
(stereo)