Sanyo PLC-XW200K Owner's Manual page 51

Standby mode
This function is available when operating the projector via
network.
Network .... Supply the power to the network function even
after turning off the projector by pressing the
ON/STAND-BY button on the remote control.
You can turn on/off the projector via network,
modify network environment, and receive
an e-mail about projector status while the
projector is powered off.
Eco . ........... Select Eco when you do not use the projector
via network. The projector's network function
will stop when turning off the projector, you
can not turn on the projector via network.
Refer to the owner's manual of "Network Set-up and
Operation".
Note:
• Factory default is Eco.
• When selecting Network, the cooling fans may be
running depending on the temperature inside the
projector even if the projector is turned off.
• Set Standby mode to Network when On start, control
port or network functions are available.
Closed Caption
Closed Caption is a printed version of the program sound or
other information displayed on the screen. If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point
Off, CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
Note:
The Closed Caption is available only under the situation
below.
• When the input signal is Component (for adjustment
only), Video or S-video, and the system is set to Auto,
NTSC or 480i, the Closed caption is available.
• If the system is set to Auto, and choose NTSC or
480i as the input signal, the Closed caption will be
available.
• Closed Caption will be unavailable when under other
setting conditions.
• The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
• The item of Closed Caption is displayed in gray while it
is not available.
buttons to select
▲▼
Closed Caption
Press the Point ▲▼ buttons to select
Off, CC1, CC2, CC3 or CC4, and then
press the SELECT button.
Setting
51