启动打印机 - AGFA DRY 3.4 Manual

144 | DRY 3.4 | 即插即用安装手册
启动打印机
12
1
1. 去除显示屏保护膜。
The procedure is identical for the upper and
1
2
2. 按"电源"按钮。
The following status is displayed:
The following status is displayed:
会显示以下状态：
3
4
3. 按"解锁"按钮
4
2602A ZH-CN 20191018 0826
注意 : 与打印机随附的胶片只能用于测试。
Startup Drystar 5500/5503
注意 : 上输入盘和下输入盘的程序相同。
Remove the display protection foil.
The films delivered with the printer are
intended for test purposes only.
lower input tray.
Remove the display protection foil.
Press the POWER button.
POWER
Press the UNLOCK button
Open the upper (lower) input tray.
UNLOCK
Open the upper (lower) input tray.
C
1
Remove the display protection foil.
C
The following status is displayed:
4
Open the upper (lower) input tray.