Keystone Adjustment; No Show Function; Picture Freeze Function; P-Timer Function - Sanyo PLC-XP30 Owner's Manual

BASIC OPERATION
If the picture has keystone distortion, correct image with KEYSTONE adjustment.
1 Press the KEYSTONE
or select the Keystone on SCREEN MENU. (Refer to page 31,
35.) The message "Keystone" is displayed.
Correct the Keystone distortion by pressing the KEYSTONE
2
/ button or the POINT UP/DOWN button(s). Press the
KEYSTONE
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE
button or the POINT UP button.
Press the NO SHOW button on the Remote Control Unit to
black out the image. This function is cancelled when the NO
SHOW button is pressed again or any other function button is
pressed.
Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. This function is
cancelled when the FREEZE button is pressed again or any other function button is pressed.
Press the P-TIMER button on the Remote Control unit. The
timer display "00 : 00" appears on the screen and the timer
starts to count the time (00 : 00 ~ 59 : 59).
To stop the P-TIMER, press the P-TIMER button. And then,
press the P-TIMER button again to cancel the P-TIMER
function.
22

KEYSTONE ADJUSTMENT

/ button on the Remote Control Unit
button or the POINT UP button to reduce the

NO SHOW FUNCTION

PICTURE FREEZE FUNCTION

P-TIMER FUNCTION

Keystone
button or
The message disappears after 4 seconds.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.
No show
The message disappears after 4 seconds.