Sanyo PLC-XP30 Owner's Manual page 27

Total lines
The number of the total vertical lines. Adjust the number to match
the image of your personal computer.
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match the image of your computer.
Horizontal / Vertical
Adjustment of the horizontal or vertical picture position. When the
image is not centered on the screen, adjust each of those items.
Clamp
Adjustment of the clamp level. When the image has a dark bar(s),
try this adjustment.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
Display area
Adjustment of the area displayed with this projector. Select the
resolution at the Display area dialog box, or adjust the number at the
column of "H" or "V" to match the resolution of the image.
Horizontal Scale / Vertical Scale
Adjustment of the horizontal height or vertical width of the image.
NOTE : The Display area, the Horiz. scale and the Vert. scale
cannot be adjusted when "HDTV1035i" or "HDTV1080i" is
selected on SYSTEM MENU (P24 and 25).
Each of the keys operates as follow.
Reset
Recalls the parameter data that was previously
adjusted.
Mode free
Clears the parameter data previously set.
Stored
Stores the parameters in the memory.
Quit
Closes PC ADJUST MENU.
COMPUTER MODE
Press the SELECT button at this
column to adjust "Clamp," "Fine
sync," "Display area," "Horiz.
scale" or "Vert. scale" .
Point the arrow at the Display area and press
the SELECT button. The Display area dialog
box appears.
27