Setting-Up The Projector; Positioning; Room Light; Ventilation - Sanyo PLC-SP20N Owner's Manual

Sanyo multimedia projector owner's manual plc-sp20n
Hide thumbs Also See for PLC-SP20N:
Table of Contents

Advertisement

POSITIONING:

ROOM LIGHT

Ideally the projector should be placed in a
room with limited light. Picture quality will
be directly affected by lighting conditions.
Max. Zoom
Screen Size
Min. Zoom
Distance
30"
Screen Size
(W x H) mm
24 x 18
Height (H1)
17.1 inch
Height (H2)
0.9 inch

VENTILATION

This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
¡Do not cover the vents with papers or other materials.
¡Keep the rear grill at least 3.3' (1m) away from any
object.
¡Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling air through the bottom vent.

SETTING-UP THE PROJECTOR

¡This projector is basically designed to project on a flat projection surface.
¡This projector can be focused from 4.6' (1.4 m) ~ 35.4' (10.8 m).
¡Use the illustration below as an example when positioning the projector to the screen.
60"
40"
46"
30"
40"
60"
30"
46"
4.6' (1.4m)
7.2' (2.2m)
60"
100"
48 x 36
80 x 60
34.2 inch
57 inch
1.8 inch
3 inch
Maximum Zoom
Minimum Zoom
150"
100"
115"
77"
DISTANCE
100"
150"
77"
115"
11.8' (3.6m)
17.7' (5.4m)
150"
120 x 90
160 x 120
85.5 inch
4.5 inch
AIR INTAKE VENT
(BOTTOM SIDE)
– 8 –
250"
200"
192"
154"
200"
250"
154"
192"
23.6' (7.2m)
29.5' (9.0m)
200"
250"
200 x 150
114 inch
142.5 inch
6 inch
7.5 inch
EXHAUST VENT
(REAR SIDE)
300"
231"
H1
H2
300"
231"
35.4' (10.8m)
300"
240 x 180
171 inch
9 inch

Advertisement

Table of Contents
loading

Table of Contents