Adjustable Feet; Moving The Projector - Sanyo PLC-SP20N Owner's Manual

ADJUSTABLE FEET

Picture tilt and projection angle can be adjusted by ADJUSTABLE
FEET. Projection angle can be adjusted 0 to 6°.
1. Lift the front of the projector and press the feet lock buttons (left
and right) under the sides of the projector.
When the buttons are pressed, feet lock is released.
2. Release the buttons at desired front height position. (feet is
locked).
3. Turn the adjustable feet and adjust picture position and tilt.
Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet
when moving the projector to prevent damage to the
projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
¡Do not drop or give a shock to the projector, otherwise damage or malfunction may result.
¡When carrying the projector, use a Sanyo recommended Carrying Case.
¡Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through a courier or transport service, use a Sanyo recommended
Case.
¡For a carrying or transportation cases, contact a Sanyo authorized dealer.

MOVING THE PROJECTOR

– 9 –
FEET LOCK BUTTONS
DOWN
UP
ADJUSTABLE FEET
DOWN
UP