Power Requirement - Sanyo PLC-SP20N Owner's Manual

Your projector uses nominal input voltages of 100-120 VAC. The
projector automatically selects the correct input voltage. The
projector is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure what type of power is supplied to your building.
Projector side (Female)
POWER REQUIREMENTS
– 6 –
Connect the AC power
supply cord (supplied)
to the projector.
AC outlet side (Male)