Menu Operation; Mode Select - Sanyo PLC-SP20N Owner's Manual

MENU OPERATION

In MENU OPERATION mode, you display menus where you can adjust the projector's settings. You can use the TOP
CONTROL OF THE PROJECTOR or the REMOTE CONTROL UNIT.
TOP CONTROL OF
THE PROJECTOR
MODE
POINT LEFT
BUTTON
AUTO IMAGE
SELECT
BUTTON

MODE SELECT

You can select a mode using the MENU from among computer 1, computer 2 and video 1.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select Computer or Video and press the SELECT (REAR CLICK)
BUTTON. Another dialog box MODE DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the mode you want (computer 1, computer 2 or video 1) to use by pressing the POINT UP/DOWN
BUTTON(s) and then press the SELECT (REAR CLICK) BUTTON.
POINT UP
BUTTON
MENU
MENU
BUTTON
POINT RIGHT
BUTTON
SELECT
NORMAL
POINT DOWN
BUTTON
MAIN MENU DISPLAY
MODE DISPLAY
MAIN MENU DISPLAY
MODE DISPLAY
MENU
BUTTON
POINT
(UP/DOWN/LEFT/RIGHT)
BUTTON
Pressing the button
upward, downward,
leftward or rightward.
– 29 –
REMOTE CONTROL
UNIT
SELECT
(REAR CLICK)
BUTTON