Applications; Operating Techniques - Nylon Line Head - Echo DSRM-2600/U Operator's Manual

DSRM-2600/U
1. Release trigger switch and
trigger switch lockout, and
allow trimmer head to stop.
2. Push power button (A) to
turn off power to unit.
• Power indicator LED (B) turns
off when power to unit is
turned off.
• If the trimmer head does not
stop when the trigger and
trigger lockout are released,
push power button to turn off and remove the battery to stop the power
supply to product. Have your authorized servicing dealer repair power
button before using product again.

Applications

Do Not install blades on GT (Curved Shaft) trimmers.

Operating Techniques - Nylon Line Head

Nylon line heads may be used for trimming, scything, edging, and scalping
of grass and light weeds.
Trimming
Feed the spinning line into the material to be cut. Tilt the line head to one
side to direct cutting debris away from you:
• Model SRM/DSRM/PAS/SB/TX/C/T (Straight shaft, counter-clockwise line
head rotation) - Tilt the cutting head down on the right side (muffler side)
while cutting to direct cutting debris away from operator. Feed the line
gradually into the material you wish to cut, avoiding contact with fences or
other barriers.
• GT models: Tilt cutting head to the left while cutting to direct debris away
from the operator.
X7508163900
© 10/21 ECHO Incorporated
OPERATION
27