Stopping Engine; Applications; Operating Techniques - Nylon Line Head - Echo GT-225SF Operator's Manual

OPERATION

Stopping Engine

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.
1. Throttle
Release throttle and allow
engine to return to idle before
shutting off engine.
The cutting attachment will continue to rotate even after the
throttle is released, maintain control of the unit until it has come
to a complete stop
2. Stop Switch
Move stop switch (A) to STOP position.

Applications

Do Not install blades on GT (Curved Shaft) trimmers.

Operating Techniques - Nylon Line Head

Nylon line heads may be used for trimming, scything, edging, and scalping
of grass and light weeds.
Trimming
Feed the spinning line into the material to be cut. Tilt cutting head to the left
while cutting to direct debris away from the operator.
26
GT-225SF
A
X7732275403
© 12/21 ECHO Incorporated