Table of Contents
Advertisement
6
Europa Controller
The Europa Controller is a fully-programmable, modular electronic controller system that allows you to
operate your power chair. It is designed to allow the user to have complete control over chair movement
and speed.
The controller has been pre-programmed to meet a typical user's needs. The program is set using
either a personal computer with software provided by the controller manufacturer or with a hand-held
programmer, also provided by the controller manufacturer.
WARNING! The controller program can affect speed, acceleration, deceleration, dynamic
stability, and braking. If it is programmed incorrectly or outside of the safe limits as determined
by your healthcare professional, it can create a dangerous situation. Only the power chair
manufacturer, an authorized representative of the manufacturer, or a trained service technician
should program the controller.
Precautionary Guidelines
Before operating the Europa Controller, please read the following. These guidelines are provided for
your benefit and will aid you in the safe operation of the control system.
Turn off the power to the controller when transferring to or from your power chair.
Follow all of the procedures and heed the warnings as explained in your power chair owner's manual.
Failure to heed the above warnings can result in personal injury and/or equipment damage.
Advertisement
Table of Contents
