Care And Maintenance; Warranty - Quantum Europa Operation Instructions Manual

Error Code Fault
1 DX Module Fault
2 DX Accessory Fault
3 Left Motor (or
connection) Fault
4 Right Motor (or
connection) Fault
5 Left Park Brake (or
connection) Fault
6 Right Park Brake (or
connection) Fault
7 Low Battery Fault
8 Over-voltage Fault
9 CANL Fault
10 CANH Fault
11 Stall Timeout
12 Module Mismatch
Table 1. Error Codes

Care and Maintenance

Refer to your power chair owner's manual for proper cleaning and disposal instructions.

Warranty

Refer to your power chair owner's manual for specific information on controller warranty.
Diagnosis
An auto download has occurred.
The Europa is not correctly programmed.
The connection between the power module
and the joystick module may be faulty.
The accessory module (CLAM) has a fault. See your Pride/Quantum Provider.
The connection between the power module
and the left motor is either open or is
shorted or the motor itself is shorted.
The connection between the power module
and the right motor is either open or is
shorted or the motor itself is shorted.
The connection between the power module
and the left park brake is either open or
shorted or the motor brake itself is shorted.
The connection between the power module
and the right motor brake is either open or
shorted or the motor brake itself is shorted.
Battery voltage has fallen below 17VDC.
The battery voltage has exceeded 32VDC.
The DX Bus cable has a short or an open.
The DX Bus cable has a short or an open.
The motor has been close to or at the
programmed current limit.
There is an incompatibility between the DX
modules in the system.
Solution
See your Pride/Quantum Provider.
Check left motor writing.
Check right motor writing.
Check motor/brake wiring.
Check motor/brake wiring.
Check that the battery wiring is secure.
Check that the battery wiring is secure.
See your Pride/Quantum Provider.
See your Pride/Quantum Provider.
Turn unit off, then on.
See your Pride/Quantum Provider.
15