Remote Control Operation - Sanyo DP42410 Owner's Manual

REMOTE CONTROL OPERATION

MUTE Button - Press to mute or restore the sound.
Numeric Buttons - Press numeric buttons to select
a channel.
Example: Press 6 then OK button to select analog
channel A6. Press 6 then 1-- button to select digital
channel D6.
INPUT Button - Press to select the source to view:
TV, VIDEO1, VIDEO2, VIDEO3, HDMI1, HDMI2,
HDMI3, PC or USB Input.
SPORTS Button - Press to choose between options
Football, Winter Sports, Marine Sports, Indoor
Sports, and Off in turn.(See page 14)
ECO Button - Press to Energy saving mode
between options Off, ECO1, ECO2, and ECO3 in
turn.
Volume Buttons - Press VOL - + to decrease or
increase the audio volume.
PIX SHAPE Button - Press to choose between
options Standard, WaterGlass, Zoom1, Full and
Zoom2. Available options depend on the signal and
the broadcast's aspect ratio.
AUDIO Button - Press to select the desired audio
mode, if available.
MENU - Press to display on-screen menu.
buttons to move the cursor up and down.
CURSOR (left) (right) Buttons - Press these
buttons to move the cursor left and right.
OK Button - Press to select an option from the
menu system, when required.
EXIT Button - Press to exit from the menu.
1-- Button - Press numeric button then press this
button to select TV digital channel.
GUIDE Button - Press to show window with the
guide information displayed on your HDTV screen
(digital channel only).
INFO Button - Press to display Channel Banner
information.
Digital Banner may contain: Channel Number,
CC State, Channel Title, Video Resolution, Video
Ratio, Signal Strength, Digital Sound information &
Program Rating.
Analog Banner may contain: Channel Number,
CC State, Channel Title, Video Resolution, Analog
Sound information, & Program Rating.
RECALL Button - Press to switch to last channel or
input selected.
Channel Up / Down (CH+, _ ) Buttons - Press to
- Press these
switch to last / next active channel.
RESET Button - Press this button to display RESET
menu. If you execute RESET function, the TV will
clear all customized settings.
NOTE : The Channel Scan Memory database will be reset
to default (all analog channel enabled). You will
need to execute Channel Scan after RESET.
SLEEP Button - Press this button to switch Off
Timer between Off, 30 min, 60 min, 90 min, 120 min,
150 min and 180 min options.
NOTE : The Off Timer will be canceled when the TV is
turned off or when a power failure occurs.
CAPTION Button - Press this button to switch CC
mode between "Off", "CC Display" and "Muted=On"
options. Digital Captions can be changed using the
menu settings.
9