Advertisement
REMOTE CONTROL OPERATION _______________________________
AUDIO. Selects the desired Audio
mode. Stereo, Mono, or SAP (when
available.)
RESET. Pressing it twice restores your
HDTV to its factory settings. All user
customized settings will be cleared.
PIX SHAPE. Cycles through the various
aspect ratios. The different settings
either stretch, zoom, or fill the image
on your screen. Bars may appear on
top and bottom of your screen (or on
left and right sides) depending on the
broadcasted signal or program.
INFO. Displays the Channel Information
banner.
SLEEP. Displays the "Off" Timer. While
Off Timer is on-screen, press the "0"
key to Set the amount of time (in 30
minute increments) at which the HDTV
will turn off.
CAPTION. Cycles through the available
Caption modes (when available.)
POWER. Turns your HDTV On or Off.
PLAY/PAUSE, REW, FF. Operate the
MUTE. Mute or restore the sound.
playback functions (when available.)
INPUT. Selects the video source to
view. Holding down the key displays
the Input List.
ON-SCREEN MENU
NUMERIC KEYS. Choose a channel
OPERATION
directly.
SUB CH. Use for the direct selection of
digital subchannels. For example: for
3
9
channel 39-1 press the
and
keys,
Display the On Screen menu and use
– –
1
followed by the dash
, and
keys.
the CURSOR
Channel. Press ENTER.
RECALL. Switch between current chan-
nel and last selected channel or input.
Channel Search
MENU. Display or hide the on-screen
Auto – Searches the detected mode,
menu.
Cable or Air.
SMART. Access HDMI2/MHL input
Cable – Searches for analog and
directly when a Roku streaming stick is
unscrambled (ClearQAM) digital cable
connected.
channels.
CURSORLM
. Move the on-screen
Air (Antenna) – Searches for analog
cursor in the desired direction.
and digital off-air channels.
ENTER. Set or select the highlighted
option on the screen.
TV
VOL + – – . Increases or decreases the
audio level.
CH LM. Scan through the channels in
the memory database.
BACK (arrow). Returns to previous
screen when accesing smart apps.
Move
EXIT. Exits the on-screen menu.
Digital Caption
Captioning is textual information trans-
Display the On Screen menu and use
mitted along with the picture and
the CURSOR
sound. Turning Captioning ON (by
Picture. Press ENTER.
pressing the CAPTION key during nor-
You may choose between Vivid, Mild,
mal TV viewing) causes the HDTV to
and Standard, which have predeter-
open these captions and superimpose
mined
them on the screen.
values, or choose the Manual option
for customized personal settings.
NOTE: Local broadcasters decide
which caption signals to transmit.
NOTE: Selected Picture setting is
Use the CURSOR LM and
keys to
modify
Font,
Background,
and
Foreground of digital caption text.
MANUAL PICTURE SETTINGS
Mode
(Home/Store)
Manual parameters to adjust include:
• Color
Choose mode depending on the TV's
location or your preferences.
• Contrast
• Sharpness
Home Mode - For saving energy and
power consumption reduction.
The Detailed Setting option allows for
Store Mode - High brightness and
the adjustment of several additional
contrast for display at retailer store.
parameters such as:
• Signal Balancer • Noise Reduction
Demo Mode - High brightness and
contrast plus TV feature demonstration.
• White Balance
• H-Size / V-Size
NOTE: Only Home Mode qualifies for
Energy Star.
• Enhanced Motion
MHL
When connecting a MHL-compatible
Display the On Screen menu and use
device to the TV's HDMI2 (MHL) input it
the CURSOR
allows for two-way communication.
Sound. Press ENTER.
NOTE: TV will turn to HDMI 2 input
Auto – Sound settings are linked
automatically when connecting a MHL-
to the current Picture option and
compatible device.
parameters are adjusted accordingly.
TV's remote control can be used to
Dynamic, Mild, Standard –
control most of the MHL-compatible
Predetermined sound parameters not
device's on-screen features.
linked with any Picture option.
MHL-compatible
device
can
be
AUDIO OUT SETTINGS
charged through HDMI2 even if the TV
is turned off (stand-by mode.)
• ARC/CEC: Allows Audio signal output
via HDMI1 to an external AV system.
ROKU
• Analog Out: Allows Audio signal out-
put via the L/R OUTPUT AUDIO jacks.
Connect the Roku Streaming Stick
NOTE: TV speakers will be disabled
(sold separately) to HDMI2 (MHL) input
when using external audio system.
to quickly enable Smart TV applica-
tions like video streaming and gaming.
MANUAL SOUND SETTINGS
NOTE: Internet Service needed for Roku
The Manual option provides different
device setup and configuration.
parameters that can be personally
adjusted:
Find out more about Roku Streaming
Stick at www.roku.com/sanyo
• Bass & Treble
• Detailed Setting: Equalizer
IMPORTANT FACT: This HDTV maintains only
one database of digital channels. Therefore,
when you search for cable channels, the
database of antenna digital channels will be
deleted. You will only be able to receive those
ClearQAM channels your cable company
provides.
Channel Scan Memory
Channel Scan Memory lists all Analog
and Digital channels found. It also lists
Analog channels that were not found,
which can be added.
Use the CURSOR LM keys to move the
channel select bar through all enabled
and disabled channels.
NOTE: You can use the CH LM keys to
change page.
Press ENTER to enable or disable the
selected channel.
TV
Channel Scan Memory
Analog
Digital
Digital
Analog
Analog
Analog
Digital
Move
CH
Page
NOTE: For information on local digital
CHANNEL
channels, visit www.antennaweb.org
Input Setting
keys to select
Input Setting feature allows the
removal of unused inputs from the AV
input loop.
Use the CURSOR LM keys to select an
AV input. Press ENTER to disable
(uncheck) or enable (check) the high-
lighted input.
TV
Channel
Channel Search
Channel Scan Memory
Input Setting
Video Setting
Channel
Channel Search
Auto
Channel Scan Memory
Cable
Input Setting
Air (Antenna)
Move
ENTER
Video Setting
NOTE: HDMI2 and USB inputs cannot
be disabled.
Unchecked box
ENTER
Select
MENU
Return
EXIT
Exit
be skipped
PICTURE
TV
Picture
Vivid
keys to select
Mild
Standard
Manual
fixed
picture
parameter
Move
ENTER
ADJUSTING A PICTURE SETTING
shared
among
AV
inputs
Use the CURSOR LM keys to highlight
(except USB.) Current option
the picture parameter you wish to
is indicated by a blue marker.
adjust. Press the ENTER key to enter the
value adjustment screen. Modify the
selected parameter's value by pressing
the CURSOR
• Tint
NOTE: CURSOR LM keys select the
• Brightness
next/previous parameter with-
out returning to the previous
• Color Temperature
menu screen.
• Edge Enhancer
Once adjustments are complete, press
the EXIT key to return to normal TV
• Dynamic Contrast
viewing.
SOUND
TV
Manual
Bass
Treble
keys to select
Bass Boost
Detailed Setting
Default
Move
ENTER
ADJUSTING A SOUND SETTING
Use the CURSOR LM keys to highlight
the sound parameter you wish to adjust.
Press the ENTER key to enter the value
adjustment screen. Modify the selected
parameter's value by pressing the
CURSOR
NOTE: CURSOR LM keys select the
next/previous parameter with-
out returning to the previous
menu screen.
Once adjustments are complete, press
• Bass Boost
the EXIT key to return to normal TV
viewing.
Video Setting
Use this feature to establish either a
Component or Composite connection
to the VIDEO INPUT jacks on your TV.
AUDIO
(DVI)
Once in the Video Setting menu, use
the CURSOR LM keys to select
Component (Y/Pb/Pr) if your hookup
uses five (5) jacks like on the left; or
select Composite (V) if your hookup
uses three (3) jacks like on the right.
NOTE: Selecting Auto Detection will
establish the correct Video Setting
depending on the type of connection
03
WREG-DT
used in VIDEO INPUT.
03-1
03-2
WCVB
04
WEXT
05
NICK
06
NICK
06-1
VBCT
SETUP
ENTER
Select
MENU
Return
EXIT
Exit
Display the On Screen menu and use
the CURSOR
keys to select Setup.
Press ENTER.
Menu Language
Choose between English, Spanish and
French for your On Screen menu's dis-
play language.
Press ENTER on the desired language.
V-Chip
(parental control)
Use this feature to automatically block
programs with content you deem as
Video
inappropriate for viewing by your
HDMI1
children.
HDMI2
HDMI3
NOTE: This feature is designed to com-
USB
ply with the United States of
:Skip
America's FCC V-Chip regula-
tions. Therefore, it may not func-
Select
MENU
Return
EXIT
Exit
tion with broadcasts that origi-
nate in other countries.
means the input will
ADJUSTING THE V-CHIP RATINGS
Select ON and press ENTER. Select
Adjust (Standard) and press ENTER.
USB INPUT
PHOTO VIEWER
Color
View pictures on your HDTV with the
Tint
use of a USB mass storage device (not
Contrast
Brightness
included.)
Sharpness
Color Temperature
HDTV SIDE PANEL
Detailed Setting
Default
Select
MENU
Return
EXIT
Exit
Insert the flash drive into the USB port,
the TV will display the Photo Viewer
keys.
thumbnail screen.
NOTE: INPUT key can also be used to
select the USB input on your HDTV.
EXIT
Thumbnail veiw
NOTE: A thumbnail hide icon will
appear if a picture cannot be decoded
or if no thumbnail data is available.
USING THE PHOTO VIEWER
On
Press ENTER on a thumbnail photo to
enable the Full View and Start
Slideshow functions.
Once in Full View mode:
Select
MENU
Return
EXIT
Exit
Use the CURSOR
picture.
Press ENTER to show the full view
options menu.
• Rotate
• Pan
• Start Slideshow
keys.
SLIDE SHOW
In the Slideshow Setup menu you may
turn the Shuffle and Quick Change
options ON or OFF.
Press ENTER on Start Slideshow
either from the Thumbnail View
Screen or from the full view options
menu to start the slideshow from the
current picture.
NOTE: Blocking a rating will automati-
cally block all higher ratings.
Unblocking a rating will auto-
matically unblock all lower
ratings.
For V-Chip (Movie) ratings select Movie
(VIDEO)
and press ENTER, and then select the
desired MPAA rating limit. Press the
EXIT key to close the V-Chip menu.
For V-Chip (TV) ratings select TV and
press ENTER. Use the CURSOR L M
keys to select a rating and press ENTER.
Use the CURSOR L M keys to set the
rating's status as Blocked or Viewable.
Once ratings are set, press the EXIT key
to close the V-Chip menu.
ADVANCED V-CHIP SYSTEM (RRT5)
RRT5 (V-Chip Regional Ratings 5) is an
advanced V-Chip ratings system for over
the air digital channels. When compati-
ble RRT5 data is detected, it's down-
loaded & stored in memory, and the
Setup V-Chip screen is then modified to
show the Adjust (Advanced) option.
Use the CURSOR L M and
highlight the different options, and use
the ENTER key to block or unblock the
selected rating.
NOTE: When vertical scroll bars appear,
CURSOR LM to gain
press
access to the additional ratings.
MORE INFORMATION
Additional information about MPAA
(Motion Picture Association of
America) and V-Chip rating can be
found
at:
www.mpaa.org
www.v-chip.org, respectively.
ONE-YEAR LIMITED PARTS AND LABOR
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS
PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO
RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED
WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
USB FLASH
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
DRIVE
WARRANTY APPLICATION
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing
Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and
workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing
Corporation will replace any defective TV via exchange at the retailer. To ensure proper
warranty application, keep the original-dated-sales receipt for evidence of purchase.
Return the defective TV to the retailer along with the receipt and the included
accessories, such as the remote control. The defective TV will be exchanged for the same
model, or a replacement model of equal value, if necessary. Replacement model will be
contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants
this product to be free from defects in material and workmanship under normal use and
conditions. During the first 90 days under this warranty for any manufacturing defect or
malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television's model number
and serial number when you call. The model number and serial number are printed on a
label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have addition-
keys to change
al statutory rights which vary from state to state.
Your Sanyo HDTV is registered at the time of purchase,
• Zoom In / Out
please keep sales receipt for future reference.
• Slideshow setup
• Browse Photo
For your protection in the event of theft or loss of this product, please fill in the
information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN
PERSONAL RECORDS.
Model No. ______________________
(Located on back of unit)
Purchase date ___________________
Where Purchased _________________________
Disposal may be regulated in your community due to environmental considerations.
For disposal or recycling information, please visit http://www.mrmrecycling.com or call
1-888-769-0149 for information on Sanyo's recycling program.
Energy Solution
ECO (ENERGY SAVER)
ECO controls the LCD backlight bright-
ness to reduce power consumption.
– Level 1: Energy Saver feature is off.
– Level 2: Low power consumption.
– Level 3: Lowest power consumption.
Press ENTER on the desired level.
LIGHT SENSOR
This feature detects ambient room
light brightness and uses that reading
to control the panel brightness level
and picture parameters to reduce the
HDTV's power consumption.
NOTE: When room lighting is dark,
the panel brightness and/or the
picture
setting
parameters
such as brightness and con-
trast are lowered. When room
lighting is bright, parameters
are affected opposite.
Use the CURSOR LM keys to select On
or OFF and press ENTER.
AUTO SHUT-OFF
When Auto Shut-off feature is set to
ON, it will allow the HDTV to automa-
tically turn off when no video and/or
audio signals are being received.
NOTES: By factory default, this fea-
ture is set to ON. The HDTV
will automatically turn off if
no AV signals are received in
a time span of 15 minutes.
Use the CURSOR LM keys to select On
or OFF and press ENTER.
Clock Timer
keys to
This feature allows you to set a
Current Time for your HDTV and
enable a Switch On Time for the HDTV
to turn on at a specific time of day.
When On Timer Function is set to ON,
the TV will automatically turn on at the
previously set Switch on Time.
Use the CURSOR LM and
keys to
modify the Current Time and/or Switch
On Time.
and
WARRANTY
(EFFECTIVE: March 1, 2007)
Serial No. _____________________________
(Located on back of unit)
Purchase Price _________________________
Hide quick links:
Advertisement
