Power Connection; Initial Setup; Initial Channel Scan; Getting Started-Power Connection/Channel Search - Sanyo DP42410 Owner's Manual

GETTING STARTED-POWER CONNECTION/CHANNEL SEARCH

POWER CONNECTION

5
Plug in AC power cord
(120V AC, 60Hz)
6
Press the POWER
button, (Follow the
on-screen instructions).

INITIAL SETUP

7
Use the CURSOR
highlight Store or Home. Press the OK button. TVs
will enter INITIAL CHANNEL SCAN automatically.
Store : This mode is for the retail display setup.
Home : This mode qualifies for ENERGY STAR.
Move
OK

INITIAL CHANNEL SCAN

NOTE : Skip the following process if there is no cable or
antenna being plugged-in to tuner connector.
8
Use the CURSOR
highlight the Channel Scan. Press the OK button.
Choose the Scan to start the channel scanning.
The scanned channels are stored in channel List
and can be scanned using the CURSOR
and (Down) buttons.
To 120V AC outlet.
to
Enter
to
(UP)
11