Sanyo VCC-9300 Brochure & Specs

Privacy Masking
When there is a house or even an object as small as a
window within the camera frame, it is possible to
mask the area so that it will not appear on the monitor
screen to protect other people's privacy.
Up to 4 rectangular masks of arbitrary size can be
set per screen (or as many as 8 using the VCC-9300
when screens are stacked).
These masked areas may be protected with
passwords (maximum four digits).
Note: Images here may differ from actual camera-generated images.
Intelligent Digital
Motion Detector
The intelligent digital motion detector enables 1.4X to
6X zoom
reliable and accurate motion detection by analysing
the "magnitude of movement" and the "size of object"
and other factors from changes in picture brightness.
When a moving object is detected, the VCC-9300 can
send an alarm signal and/or switch to zoom modes of
Note: Images here may differ from actual camera-generated images.
1.4X to 6X. Scene elements such as swaying trees and
flickering lights, etc., can also be masked to prevent
triggering of false alarms.
32X Sensitivity Boost
Easy On-screen Setup and for Minimum Illumination
Customizing of Default Settings of 0.06 Lx
Both the VCC-9300 and VCC-ZM300 can While achieving 2.0 lx minimum subject
M AI N M EN U
be programmed on-screen and operated illumination at maximum gain, sensitivity
LANGUAGE SET
using a controller with SANYO's Security
CAMERA ID OFF can be further heightened to 32X for 0.06 lx
SYNC INT
Serial Protocol (SSP). Moreover, as an
PRIVACY MASK SET minimum illumination when the sensitivity
LENS SET
added bonus, with VCC-ZM300 you can MIRROR OFF
boost function is activated at 50 IRE (F1.6).
VIEW SETTING 1
even program and customize default OPTION SET
PRESET OFF
MENU END
other settings using the cursor and menu
setting buttons integrated into the rear
panel of the camera.
Other useful features
Adjustable gamma correction and aperture settings Display of assignable camera ID and titles (16 characters max.)
VCC-9300 / VCC-ZM300
Specifications
Dimensions
VCC-9300
MODEL VCC-9300
Image sensor 1/4" interline transfer method CCD
Effective pixels 768 (H) x 494 (V)
TOP
Horizontal resolution Over 520 TV lines
Lens 22 power zoom lens, f = 4.0 to 88 mm (F1.6 to 3.8), Electronic zoom and gearing,
Zoom speed setting possible
Electronic zoom 16 power (combined with optic zoom give 352 power max.), Zoom magnification setting possible
Auto focus AUTO / ONE-PUSH / MANUAL, AF area setting possible (3 sizes)
Iris control AUTO / MANUAL
Synchronization method Internal synchronization / Line lock
Minimum illumination 2.0 lx (F1.6) at max. AGC gain, 0.06 lx (F1.6) at x32 electronic sensitivity boost [50 IRE]
0.8 lx (F1.6) at max. AGC gain, 0.024 lx (F1.6) at x32 electronic sensitivity boost [20 IRE]
S/N More than 48 dB
Backlight compensation Multi-zone photometry / 5 section photometry / Multi-zone Masking
Electronic shutter Fast shutter speed mode: 1/60, 1/100, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000,
Slow shutter speed mode: x2, x4, x8, x16, x32
Electronic sensitivity boost AUTO / OFF, works with auto iris
White balance ATW / AWC / MWB
Automatic gain control ON / OFF / MANUAL
Motion detector ON / OFF, individual settings possible
Aperture H / V setting possible
Privacy masking ON / OFF, max. 8 masks (wide view screen, 1 screen max. 4 masks), Password lockable
Alarm input/output 8 external inputs, 2 external outputs,
Motion detector with external alarm AND/OR output options
Mirror image effect Horizontally (H), vertically (V), horizontally and vertically (VH)
TOLERANCE
Character display ON / OFF, screen titles and camera ID max. 8 characters each
View setting 9 settings
Auto mode Sequential pan / Auto pan / Tour (2 tour recordings, 30 seconds each)
Rotation range Horizontal: 360 endless, Vertical: 0 to 180 (digital auto flip)
VCC-ZM300
Rotation speed Horizontal: 360 /second (preset), 0.5 to 120 (manual),
Vertical: 360 /second (preset), 0.5 to 120 (manual)
Preset position setting 64 settings
Communications Coaxial control, RS-485
Operational temperature/humidity +14 to +122 F [–10 to +50 C], below 90% RH
COLOR CCD CAMERA
Power source 24 VAC, 60 Hz
AF 22x OPTICAL ZOOM
Power consumption 15 W
Weight 2.5 kg [80.7 oz]
MODEL VCC-ZM300
Image sensor 1/4" interline transfer method CCD 7 8 9 10 11
Effective pixels 768 (H) x 494 (V)
Horizontal resolution Over 520 TV lines
Lens 22 power zoom lens, f = 4.0 to 88 mm (F1.6 to 3.8), Electronic zoom and gearing,
Zoom speed setting possible
Electronic zoom 16 power (combined with optic zoom give 352 power max.), Zoom magnification setting possible
ZOOM COM IN
Auto focus AUTO / ONE-PUSH / MANUAL, AF area setting possible (3 sizes)
FOCUS ALARM
Iris control AUTO / MANUAL
Synchronization method Internal synchronization / Line lock
Minimum illumination 2.0 lx (F1.6) at max. AGC gain, 0.06 lx (F1.6) at x32 electronic sensitivity boost [50 IRE]
0.8 lx (F1.6) at max. AGC gain, 0.024 lx (F1.6) at x32 electronic sensitivity boost [20 IRE]
S/N More than 48 dB
Backlight compensation Multi-zone photometry / 5 section photometry / Multi-zone Masking 1 Video output connector (VIDEO OUT: BNC type)
2 Power indicator (POWER)
Electronic shutter Fast shutter speed mode: 1/60, 1/100, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000,
3 Cursor button
Slow shutter speed mode: x2, x4, x8, x16, x32
Menu setting button (SET)
4
Electronic sensitivity boost AUTO / OFF, works with auto iris
5 RS-485 control push-lock terminals (RS-485, A, B, G)
White balance ATW / AWC / MWB
6 24 V AC or 12 V DC input terminals (AC 24 V, DC 12 V, GND)
Automatic gain control ON / OFF / MANUAL
Motion detector ON / OFF, individual settings possible
Aperture H / V setting possible
Privacy masking ON / OFF, max. 4 masked locations, Password lock possible
Alarm input/output 1 alarm input (for external alarm switch), 1 alarm output (for sending signal to
system controller or alarm detection device such as a buzzer)
Mirror image effect Horizontally (H), vertically (V), horizontally and vertically (VH)
Character display ON / OFF, camera ID max. 18 characters
View setting 9 settings
Communications Coaxial control, RS-485
Operational temperature/humidity Temperature: +14 to +122 F [–10 to +50 C], Humidity: 35 to 90% RH
Power source 24 VAC, 60 Hz / 12 to 15 VDC
Power consumption 4.5 W
Weight 380 g [12.3 oz]
NOTE: Specifications subject to change without notice.
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
POWER SUPPLY CORD, APPROX. 2 M
70.7(2.8 ) II ±0.5
EXPANSION CONNECTOR
(5 PIN, WHITE)
ALARM INPUT CONNECTOR (10 PIN)
CAMERA CONTROL CONNECTOR
1/4" Color CCD DSP
(5 PIN, BLACK)
45 O 45 O
BNC–R JACK
High-resolution
COMPOSITE CABLE, APPROX. 50 CM LONG
(mm)
Cameras
FRONT SIDE
125(4.9 II )
135(5.3 ) II
2(0.09 II ) (mm)
125.3(4.9 ) II
9.3
54(2.1 II ) 116(4.6 ) II (0.4 II )
6(0.2 ) II
COLOR CCD CAMERA
AF 22x OPTICAL ZOOM
(mm)
11.8(0.5 ) II
1/4"-20UNC
2 3
threaded hole
(top / bottom selectable)
4
5
1
OUT
6
7 Zoom terminal (ZOOM)
8 Focus terminal (FOCUS)
9 Grounding terminal (COM)
Alarm output terminal (ALARM OUT)
10
11 Alarm input terminal (ALARM IN)
Accredited
by the RvA
ISO 9001 REGISTERED FIRM
DNA Certification B. V., THE NETHERLANDS
SANYO Electric Co., Ltd.
Video Imaging Systems Division
www.sanyosecurity.com
©2002 SANYO Printed in Japan `02.7.MA.
SMS-041
VCC-9300
Color
(NTSC)
VCC-ZM300
Color
(NTSC)
D o m e
S p e e d
C a m e r a
VCC-9300
o c u s
A u to F
a m e r a
Z o o m C
VCC-ZM300