Table of Contents
Advertisement
7
TECHNICAL SPECIFICATIONS
The product BiDi-Switch is produced by Nice S.p.a. (TV). Warnings: - All technical specifications stated in this section refer to an ambient
temperature of 20 °C (± 5 °C) - Nice S.p.a. reserves the right to apply modifications to the product at any time when deemed necessary, while
maintaining the same functionalities and intended use.
BiDi-Switch
Type
Power supply
Load rated current
Recommeded wires cross-section
Required circuit breaker
Casing protection rating
Operating temperature
Dimensions (mm)
Weight
Radio transceiver
Frequency band
Code
No. of memorisable transmitters
Transceiver range
Max. transmit power
(*) The transceiver range is strongly influenced by other devices operating at the same frequency with continuous transmission, such as alarms
and radio headphones which interfere with the control unit transceiver.
7
PRODUCT DISPOSAL
This product is an integral part of the automation and therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified personnel. This
product is made of various types of material, some of which can be recycled while others must be scrapped. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous substances which, if disposed of into the environment, may cause
serious damage to the environment or physical health.
As indicated by the symbol alongside, disposal of this product in domestic waste is strictly prohibited. Separate the waste into
categories for disposal, according to the methods envisaged by current legislation in your area, or return the product to the retailer
when purchasing a new version.
Caution! – local legislation may envisage serious fines in the event of abusive disposal of this product.
8
DECLARATION OF CONFORMITY
Hereby, NICE S.p.A., declares that the radio equipment type BiDi-Switch is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.niceforyou.com/en/support
in-wall/flush box mounted control unit for mains powered devices
100–240 V AC, 50/60 Hz
6.5 A per channel, 10 A combined
0.5–4 mm
for 1 wire; 0.5–1.5 mm
2
Compliant with IEC/EN 60898-1; Curve code: B; Rated current: up to 16 A;
Breaking capacity: 6 kA; Rated insulation voltage: 500 V;
Rated impulse withstand voltage: 4 kV;
433.05–434.04 MHz
OPERA/FLOR (rolling code), PLN2+ (rolling code)
Estimated at 150 m in open space and 20 m inside buildings (*)
for 2 wires
2
IP 20
0–35 °C
45 x 36 x h 23
20 g
30
10 dBm
Advertisement
Table of Contents
