Home Zone Security ES06508V Installation Instructions

s e c u r i t y

IMPORTANT SAFETY OPERATING INSTRUCTIONS

1.
Please read all warning and instruction before attempting to install this light.
2.
Disconnect power before installing or servicing.
Risk of electrical shock
1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
2. Make sure all electrical and grounded connections are in accordance with the National Electrical Code
and applicable local code requirements.
3. All wiring connections should be compliant with UL standard.
Risk of injury
1. Wear gloves and safety glasses at all times when moving luminaire from carton, installing, servicing or
performing maintenance.
2. Avoid direct eye exposure to the light source while it is on as this may cause irreparable damage to the
eyes.
3. Account for small parts and destroy packing material, as these may be hazardous to children.
Risk of burn
1. Allow fixture to cool before touch.
2. Do not exceed maximum wattage marked on luminaire label.
Attention: lights must be installed by an experienced household wire installer or a qualified electrician,
Electrical system and the electrical connection method of light fixture must conform to the national electrical
standards and specification requirements of the local architecture.
FCC
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
www.homezonesecurity.com
Curved Head Security Light
Model No. ES06508V
(888) 782-5618