Table of Contents
Advertisement
on the frequency and intensity of use and the gen-
eral condition.
8 Scope of delivery
• 1x shower / toilet wheelchair
1x toilet bucket
• 1x user manual (02.07.142)
• The reprocessing and maintenance instructions
can be ordered or viewed and downloaded at
www.rebotec.de/downloads.
9 Setting up for use
• The product has been carefully inspected in the
factory for freedom from defects and complete-
ness. Please check the product for any possible
damage which may have occurred during transport
and for completeness of the scope of delivery upon
receipt. Assembly or adjustment shall be carried
out by the specialist dealer
9.1 Folding down the footrests
• Turn (1) the footrests forwards until they engage
automatically. Fold (2) the footrests down. Adjust
the height of the footrests if necessary.
1
2
9.2 Adjusting the footrest height
• The footrest height can be adjusted in 7 positions.
Loosen and remove the screws on the side of the
footrest using an Allen key (SW 5). Select the ap-
propriate height level (1-7) and screw the footrest
back in place. Make sure that the screws are firmly
tightened!
BA-Nr.: 02.07.142/2021-12-A01
REBOTEC /
Min
Max
9.3 Assembling the backrest
• Swivel the armrests forwards again so that they
engage in the groove on the backrest and with the
locking bolt in the base frame.
10 Product data
• We reserve the right to make technical develop-
ments and improvements with respect to the de-
sign shown in this User Manual.
• See 15
Characteristic
Bremen
1.
User weight
2.
Product weight*
3.
Total weight*
Skin compatibility
*Without accessories
11 Operation of the product
• Before use, it must be ensured that the product is
in proper condition. If defects or malfunctions are
evident, the product must not be used. Have the
defects corrected by a specialist dealer before use.
If necessary, depending on the patient's
limitations (adequate mobility and muscle
strength), sitting down and getting up must
be done with the help of a caregiver. Subsequent
adjustments may only be made by qualified per-
sonnel.
11.1 Sitting down
• Before sitting down and standing up, make sure
that the product is securely positioned to prevent it
from slipping or tipping over, that at least two
wheels are braked, that the armrests are properly
engaged, that the seat surfaces are firmly in place,
and that the footrests are folded to the side or up.
- 6 -
EN
•
Swivel the armrest
backwards,
place
backrest on the tubes of the
chair frame and push it onto
the base frame as far as it
will go.
Value
max. 90 kg
16.4 kg
19.0 kg
DIN EN 10993-1/-5
the
Advertisement
Table of Contents
