Specifications; Important Safety Instructions - Makita ML105 Instruction Manual

ENGLISH (Original instructions)
1. Battery cartridge
2. Red indicator
3. Battery release button

SPECIFICATIONS

Major Features
Voltage
LED
Operating time
(approximately)
Dimensions
Net Weight
• Due to our ongoing research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
....... Read instruction manual.
................. Indoor use only
.................. Do not stare at the operating light
source.
................. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
4. Indicator lamps
5. Check button
6. Switch
Model
BL1016 battery
BL1021B battery
BL1041B battery
with BL1041B battery
Parts description
DC 10.8 V - 12V max
L 268 mm x W 66 mm x H 93 mm
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
6. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
7. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
8. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
9. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
10. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
7. Strap hook
8. Ring
9. Hole
ML105
4.9 W x 1 pc
5.5 hours
7.0 hours
14 hours
0.53 - 0.70 kg
3