Units with electric heat are available with or without door interlocking disconnect switch.
3.
Units with electric heat are available with or without line fuses.
4.
Units with electric heat must not be run below the minimum cfm listed. Refer to the General Data section for more information.
5.
Electric heat is balanced staging: 1 stage = 100 percent, 2 stages = 50 percent/50 percent.
Table 28. Airflow min/max for BCHE/BCVE blower coils
Unit Size
12
Nominal cfm
400
Airflow
Minimum cfm
250
Maximum cfm
500
Note: Minimum airflow limits apply to units with hot water or electric heat. There is no minimum airflow limit on cooling coil units. Maximum airflow limits are to help prevent