Table of Contents
Advertisement
2.3 Placement
2.4 Start to use
2.5 The arrangement of bottle
Do not let bottle touch the cooler's back in order to maintain good air circulation in the cooler.
The bottle number may be different from bottles in different shape and size.Oversized bottle may have impact
on the number of bottle storage in the beverage cabinet.
2.6 Usage of temperature zones inside the Wine Cooler
higher than the low area.
2.7 Energy saving tips
heat
Before using the cooler,remove
all packaging materials including
bottom cushions and foam pads
and tapes inside the cooler,tear
off the protective film on the door
and the cooler body.
Avoid direct sunlight and heat
sources sunch as stove,heating
radiator,etc.If the cooler has to
be put next to heat source,a
suitable insulation board shall be
applied or keep the cooler away
from heat source.
The cooler shall stay for half an hour before connecting power when it is firstly
started.
Clean up the inner chamber before put into use for first time .
Do not connect cooler to electronic energy saving plug and converter that can
convert DC into AC (E.g.: solar energy system, ship grid).
Water drop or frost will be generated on backside of Wine Cooler when compressor is
running, which is decided by function of cooler. wiping out frost or water drop is not
needed as the back will wipe them out automatically. The defrosted water will be collected
into drain tank, then inflow into water disposal pan above the compressor and vaporized.
s
8
The cooler is placed in a
well-ventilated indoor place;the
ground shall be flat,and sturdy
(rotate left or right to adjust the
wheel for levelling if unstable).
The more refrigerant in the Wine
Cooler, the larger the space in which
the Wine Cooler should be placed.
Every 8g of refrigerant must have at
least 1m3 of heat dissipation space.
The amount of refrigerant
is indicated on the nameplate on the
back of the Wine Cooler.
The top space of the cooler
shall be greater than 30cm,and
the distances from bothsides
and backside shall be more
than 10cm to facilitate heat
dissipation.
Advertisement
Table of Contents
