Table of Contents
Advertisement
Do not allow static electrical discharge to the instrument.
Failure to observe the above may affect the measurement
Forbidden
value and cause damage to the instrument circuit.
Electrostatic-sensitive devices
Regularly check that the tip of the probe is clean.
Dust and/or foreign substances adhered to the air flow
element can hinder the accurate measurement.
To remove dust, blow it off with a blower brush for cameras or
Forbidden
Prober Handling
lightly rinse with water and dry it well.
※Be sure to turn the power off to the main unit before
cleaning the air flow element.
※Never dry the probe by heat. (Failure to observe this may
cause damage to the probe.
If the instrument and the probe have been stored in a cold
place, do not bring the instrument to a warm place to avoid a
sudden temperature change.
Forbidden
Even when the instrument is used in the specified operating
temperature and humidity, a sudden temperature change may
cause condensation. Condensation on the sensor may cause
inaccurate measurements. If condensation occurs in the metal
part of the sensor, it becomes rusty which may cause damage
to the probe.
Do not touch the LCD screen with a sharp-pointed object or
with excessive pressure.
It may cause distortion of the screen or a malfunction.
Forbidden
A rapid temperature change may cause a malfunction of the
screen.
When storing the instrument, keep it in a place with an
ambient temperature of -20 to 70℃ and no condensation.
Proper Handling
Do not dispose of the instrument as household waste.
Please note that the disposal of the instrument and batteries
should be in line with your local or national legislations.
Forbidden
vi
Advertisement
Table of Contents
