Start-Up Sheet - Omega VSHP Series Installation And Operation Manual

OMEGA | WATER SOURCE HEAT PUMPS
INSTALLATION INFORMATION
Job Name____________________________
City______________________Province/State_______________Postal/ZIP Code___________
OMEGA Unit Model #____________________________________________________________
OMEGA Unit Serial #____________________________________________________________
Unit Tag#__________________________
Technician___________________________Company_________________________________
Heating
Riser Fluid Loop Temperature:
Entering Water Temperature (EWT):______F
Leaving Water Temperature (LWT): ______F
T = EWT - LWT = _________
Water Flow Rate (GPM):______
(units with optional balancing valve see nameplate for
GPM rating)
Air Temperature (Measure the difference in
temperature across air coil) for measuring
sensible capacity:
T = LAT - EAT
Sensible Capacity (Btuh) = T x CFM x 1.08
Entering Air Temperature (EAT):______F
Leaving Air Temperature (LAT): ______F
o
T = _________
F
Sensible Capacity (Btuh) = _________
Fan Speed Used:
Compressor Amp:
Fan Amp:
Run Time For Test:
Omega has a policy of continuous product improvement and reserves the right to change design and specifications without notice.
36
VSHP UNIT START-UP SHEET
o
F
Low Med High
________
________
________
Cooling
Riser Fluid Loop Temperature:
Entering Water Temperature (EWT):______F
Leaving Water Temperature (LWT): ______F
T = LWT - EWT = _________
Water Flow Rate (GPM):______
(units with optional balancing valve see nameplate for
GPM rating)
Air Temperature (Measure the difference in
temperature across air coil) for measuring
sensible capacity:
T = EAT - LAT
Sensible Capacity (Btuh) = T x CFM x 1.08
Entering Air Temperature (EAT):______F
Leaving Air Temperature (LAT): ______F
o
T = _________
F
Sensible Capacity (Btuh) = _________
Fan Speed Used:
Compressor Amp:
Fan Amp:
Run Time For Test:
OMEGA-VSHP.G-IOM-2205
o
F
Low Med High
________
________
________