Web Based Access - Omega VSHP Series Installation And Operation Manual

OMEGA-VSHP.G-IOM-2205
Wireless Router Method
1. To connect to the controller you will need the follow-
ing: Ethernet cable, Laptop/Tablet, and wireless
router (e.g. TP Link TL-WR802N, shown below).
Configure routers as per manufacturer instructions.
Setup as Access point with Static IP (leave IP ad-
dress blank).
2. Remove electrical box access panel and connect rout-
er via ethernet cable directly into surface mounted ether-
net port (RJ45) on control board.
3. Connect tablet, laptop or phone to WIFI router. Turn
off mobile data. Once connected open up your internet
browser (i.e. Internet Explorer, Google Chrome) and
type in the following address 192.168.0.99
Direct to Laptop Method
1. To connect to the controller with a laptop you will need
the following: Ethernet cable & Laptop.
2. Remove electrical box access panel and connect
ethernet cable directly into surface mounted ethernet
port (RJ45) on control board.
3. On laptop access "Network and Sharing Center"
though the "Network & Internet Settings" icon located in
the bottom right taskbar.
4. In the Network & Sharing Center click on "Ethernet" /
"Local Area Connection" as indicated below.
5. Local Area Connection Status will open, click on Prop-
13