Download Print this page
Casio DQS-30 User Manual
Casio DQS-30 User Manual

Casio DQS-30 User Manual

Casio clock user manual

Advertisement

Quick Links

MA0212-A
UP
DOWN
SNOOZE
• A sticker is affixed to the glass of this clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Before using this clock for the first time, note the insulation sheet sticking out of the battery compartment. Pull out
the insulation sheet in the direction indicated by the arrow before using the clock.
• After removing the insulation sheet, press the RESET button (5 5 5 5 5 ).
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
DATE (month - date)
PM indicator
Current time
(Hour, minutes, seconds)
USER'S GUIDE DQS-30
SNOOZE
ON
OFF
LIGHT
Alarm Off
Alarm On
Snooze on indicator
Day of the week
Alarm time
Alarm on indicator
GENERAL GUIDE
1 1 1 1 1 SNOOZE button
Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 LIGHT button
Press to turn on the backlight.
SET
RESET
3 3 3 3 3 Alarm Time Set button
Use this button to change the alarm time or current time setting.
4 4 4 4 4 SET button
Use this button when setting the current time.
5 5 5 5 5 RESET button
Press to reset the clock after replacing the battery.
6 6 6 6 6 Alarm Switch
Use this switch to turn the alarm on and off, and to turn on the snooze alarm.
7 7 7 7 7 Solar panel
8 8 8 8 8 Insulation sheet
Pull out the insulation sheet in the direction indicated by the arrow before using the clock.
After removing the insulation sheet, press the RESET button (5 5 5 5 5 ).
SETTING THE TIME
1. Press the SET button (4 4 4 4 4 ) to cycle through the setting screens as shown below.
Month and Day Setting Screen
Normal Timekeeping Screen
Year Setting Screen
12-hour/24-hour Timekeeping Screen
Time Setting Screen
1

Advertisement

loading

Summary of Contents for Casio DQS-30

  • Page 1 Day of the week PM indicator Current time (Hour, minutes, seconds) USER’S GUIDE DQS-30 GENERAL GUIDE 1 1 1 1 1 SNOOZE button Pressing this button while the alarm is sounding stops the alarm. 2 2 2 2 2 LIGHT button Press to turn on the backlight.
  • Page 2 USER’S GUIDE DQS-30 2. While the screen you want is on the display, use the Alarm Time Set button (3 3 3 3 3 ) to change the digits that are flashing. Press UP to increase the flashing digits. DOWN Press DOWN to decrease the flashing digits.