Casio DQ-683 User Manual

• A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using
the clock.
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Alarm Off
DATE (month - date) Day of the week
PM indicator Current time
(Hour, minutes, seconds)
GENERAL GUIDE
1 1 1 1 1 Snooze/Light button
• Press to turn on the backlight for three or four seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 Alarm Time Set button
Use this button to set the alarm time or current time.
3 3 3 3 3 SET button
Use this button when setting the current time.
4 4 4 4 4 RESET button
Press to reset the clock after replacing batteries.
5 5 5 5 5 Alarm Switch
Use this switch to turn the alarm on and off, and to turn on the snooze alarm.
6 6 6 6 6 Volume Selector
Selects the volume level.
USER'S GUIDE DQ-683
Alarm On
Snooze on indicator
Alarm time
Alarm on indicator
SETTING THE TIME
1. Open the battery compartment cover. Press the SET button (3 3 3 3 3 ) to cycle through the setting screens as shown
below.
Normal Timekeeping Screen
Year Setting Screen 12-hour/24-hour Timekeeping Screen
Month and Day Setting Screen
2. While the screen you want is on the display, use the Alarm Time Set button (2 2 2 2 2 ) to change the digits that are
flashing.
Press + to increase the
flashing digits.
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting.
• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour
and 24-hour timekeeping.
3. After making the settings you want, use the SET button (3 3 3 3 3 ) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.
Time Setting Screen
Press – to decrease
the flashing digits.
1