Casio DQ-746 Operation Manual

MA0506-EA
ILLUSTRATION
°C/°F
SET
°C/°F
SET
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
PM indicator
Date
(month - day)
Day of the week
Operation Guide DQ-746
INVALID RESET
INVALID RESET
Snooze Alarm On
Current time
(Hour, minutes,
seconds)
Snooze on
indicator
Current
temperature
Alarm time Alarm on indicator
GENERAL GUIDE
1 1 1 1 1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about five seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
3 3 3 3 3 + / – buttons
Use these buttons to change the alarm time or the setting that is flashing on the display.
° °
4 4 4 4 4 C/ F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 5 5 5 5 SET button
Use this button when setting the current time.
6 6 6 6 6 RESET button
Press this button to reset the clock after replacing its batteries.
• Buttons marked "INVALID" have no function.
USING THE CLOCK
1. Press the SET button (5) to cycle through the setting screens as shown below.
Normal Timekeeping Screen
Year Setting Screen Month and Day
Setting Screen
2. While the screen you want is displayed, use the + and – buttons
(3) to change the flashing digits.
• Holding down + or – changes the flashing digits at high speed.
• You can set the year in the range of 2000 to 2039. The day of the
week is set automatically in accordance with the date setting.
• Pressing + or – while the Time Setting Screen is on the display
causes the seconds count to be reset to 00.
• Each press of + or – while the 12-hour/24-hour Timekeeping
Screen is on the display toggles between 12-hour and 24-hour
timekeeping.
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.
• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Time Setting Screen 12-hour/24-hour
Timekeeping Screen
Press – to Press + to
decrease increase
the flashing the flashing
°C/°F SET
digits. digits.
1