Samsung NETWORK DIGITAL VIDEO RECORDER User Manual page 8

14
F.Fwd Search
15
PLAY
16 MENU
17 ▲
18 ▼
19 ◄ ( ENTER)
20 ► ( ENTER)
21 COPY
22 CF Card
23 HDD FRAME
24
Part Label
24 ETHERNET
25 LED
26 COM PORT
27 CAMERA OUT
28 CAMERA IN
29 MONITOR OUT
30 ALARM IN / Relay
31 POWER / POWER SW
Press F. Fwd to play video forward at high speed. Press the button again
the speed will be change circulative from ×2,×4, , to the highest ×6.
Press the Play button to into time search and play video forward.
Press MENU to go into or exit menu.
1. Move the cursor upward or decrease the number.
2. When it's not under recording mode, you can use the button to adjust
position of date & time display which appears on OSD.
1. Move the cursor downward or increase the number.
2. When it's not under recording mode, you can use the button to adjust
position of date & time display which appears on OSD
1. Press ENTER button to make choose or make confirm in MENU
system.
2. You can use ENTER key to indicates H.D.D status when system is not
under Menu mode.
3. Make any changes in the selected option or decrease/increase the
number.
CF Card Backup button.
Slot for compact flash (CF) card.
Location of installation for removable HDD.
Back Panel Layout Overview
27
26
25
28
Back Panel Components Function List
Ethernet network interface.
Network power indicator and network activate indicator.
COM port for RS-485 interfaces which upon to request.
Camera 1-4 video output with BNC connector.
Camera 1-4 video input with BNC connector.
Composite video output with 2 BNC connectors.
8-Pin Alarm input and Relay output connector.
AC90V~AC260V input.
Power ON/OFF switcher.
29
30
Function
3
31