Hdd Management - Samsung NETWORK DIGITAL VIDEO RECORDER User Manual

4 channels network digital video recorder
Table of Contents

Advertisement

and down for indicating current event which been selected.
Press "◄ or ►" key to select events storage from master hard drive or slave hard drive . When once
selection has been made and than press ►PLAY key to start playing records in normal speed.
There are totally 4 different type's event will be recorded:
1. REC:Event when start recording by press "REC" key.
2. PWR:System will event up from power interruption after restarting.
3. ALM:When external alarm was triggered, event up with alarm number.
4. MOT:When motion detection was triggered, event up with alarm number. Record setup
"MOTION EVENT MIGRATION" must setting on.

7. HDD MANAGEMENT

HDD MANAGEMENT
> OVERWRITE MODE
HDD FULL WARNING
MASTER HDD CAPACITY
MASTER HDD LEFT RATIO
MASTER HDD FORMAT
SLAVE HDD CAPACITY
SLAVE HDD LEFT RATIO
SLAVE HDD FORMAT
EXIT
Contents:
1
OVERWRITE MODE
Use "◄ or ►" button to enable or disable overwriting when HDD is full.
When HDD overwrite is enabled, the oldest partition on the HDD will automatically be
reused, that means the oldest images will be overwritten by the current images.
When overwrite mode is disabled, the HDD Full Warning percentage selection will be
appeared and need to be configured.
HDD FULL WARNING
Use "◄ or ►" button to select one of the four settings (5% / 10% / 15% / 20%).
The default is 10%. The buzzer will turn on when free space left in the HDD go below the
set value and it will on again when the total free space left go below 5%.
MASTER HDD CAPACITY
The master HDD capacity sign will be indicated in left on the screen, It can't be revised.
MASTER HDD LEFT RATIO
The master HDD left ratio sign will be indicated in left on the screen, It can't be revised.
MASTER HDD FORMAT
Use "◄ or ►" button to enter the MASTER HDD FORMAT menu.
Use the view control button on the front panel to input the number.
is "1" ,
When you key in the correct password, the screen will be displayed the following
message:
Otherwise, the following error message will be displayed on the screen:
NO
20%
76GB
73GB 97%
N/A
N/A
YES (NO)
10% (5% / 10% / 15% / 20%)
76GB
73GB 97%
PASSWORD INPUT (4) : _ _ _ _
is "2" ,
is "3" ,
PASSWORD CORRECT!
HARD DISK FORMATTED
PASSWORD INCORRECT!
Press the MENU button to go into the
main menu.
Use the ▲ or ▼ button to select items.
Press the "◄ or ►" button to confirm
the selection.
Press MENU to escape to exit the set
up mode.
is "4"
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents