Table of Contents
Advertisement
Netcam(W)_SNC-L200(W)
Network Configuration
Network Status Notification
Automatically informs the user of a cable modem or ADSL of a new IP address via mail when
the link IP address changes.
1
Mail Notification: Decide whether to use this service. When selecting Enable, you can
use the Mail Notification function.
2
SMTP Server: This address is used to send E-mail to the SMTP(Simple Mail Transfer
Protocol) Server. Enter the latter part (after @)of the E-mail address you use.
3
Authentication Login: Select Enable to use the log-in screen. It is recommended to
select Enable.
4
User ID: Enter the User ID of the sender 's E-mail address when using the Authentication Login.
5
Password: Enter the User Password of the sender 's E-mail address when using the
Authentication Login.
6
Sender: Enter the sender 's E-mail address.
7
Recipient 's Email Address1~3: Enter up to 3 mail addresses to receive the changed IP address.
8
User-defined Message: Enter the message to be sent with the mail. Up to 50 characters
can be entered per line.
64
1
2
3
4
5
6
7
8
DDNS Configuration
Automatically switch the IP address of the Netcam(W), and access the new
address.
Default setting of the DDNS server is websamsung. net.
The domain name is http: //w(Mac address last 6 numbers). websamsung. net.
If you register the domain name of the link IP of the Netcam(W) on our DDNS
server as with cable modem and ADSL, you can access the Website more
conveniently.
Netcam(W)_SNC-L200(W)
65
Advertisement
Table of Contents
