Samsung SNC-L200(W) User Manual page 19

Netcam(W)_SNC-L200(W)
Setting the Network
When accessing a local network, use the address displayed as the
Note
"Camera 's address for Local Network Access" of the "UPnP
Status." When accessing an external network, use the address
displayed as "Camera 's address for Access via Internet."
36
The results of port forwarding
1
appear in the UPnP Portmapping
Result screen.
- Access the address displayed in the
results to be connected with an
external network.
- Check the URL or the external
access, and click the Close Button.
2 Search the set values again by
clicking the Search Button on the
bottom of the SNC Installer screen.
- The "Success(W)" is displayed in
the "Status " if the network is
successfully connected.
- When using wireless Netcam(W),
pull out the LAN cable and close the
cover after settings.
UPnP Configuration Screen
1
2
3
4
5
6
7
1. Port Forwarding: Select the method of allocating port numbers. "Disable" means no
allocating of port numbers.
"Enable" means auto allocating of port numbers. "User Define" means the user 's entering
port numbers.
2. Display shortcut Icon in My Network Places: Decides whether the Netcam(W) icon will
be displayed in the "My Network Environment."
3. Status: Displays the status of the UPnP. When succeeding, "Success" is displayed.
When failing, the "Error" is displayed.
4. External Port No.: Displays the allocated port number.
5. Router Global Address: Displays the Global IP address of the router.
6. Camera 's address for Local Network Access: Displays the address with which the user
can access the Netcam(W) over the current network.
7. Camera 's address for Access via Internet: Displays the address with which the user can
access the Netcam(W) via the Internet.
Netcam(W)_SNC-L200(W)
37