Table of Contents
Advertisement
Netcam(W)_SNC-L200(W)
Network Configuration
UPnP Configuration
Set the port number used to access the Netcam(W) over the Internet, and set the
display of the Netcam(W) icon in the "My Network Places."
1
Port Forwarding: Select the method of port number allocation. "Enable" is automatic
allocation, and "Disable" is not allocating the port number. "User Define" is the user
entering the port number.
2
Display a shortcut Icon in My Network Places: Decide whether to display the
SNC-L200(W) icon of the "My Network Places."
3
UPnP Status (Select the settings of item 1 and 2 above and click Apply to display it)
- Status: Display the status of the UPnP.When succeeding, "Success" is displayed. When
failing, "Error" is displayed.
- Port No.: Display the allocated port number.
- Router Global Address: Display the router of the Global IP.
- Camera 's address for Local Network Access: Display the address with which the user
can access the Netcam(W) over the network.
- Camera 's address for Access via Internet: Display the address with which the user
can access Netcam(W) from external Internet.
62
Note
1
For the SNC-L200(W)icon of "My
2
Network Places,"Windows XP
Service Pack 2 must be installed.
And the "UPnP
3
Framework "in the exception tab of
"Controller-Windows Firewall "must
be checked.
You can access the Netcam(W) by
double clicking the SNC-L200(W)
icon of "My Network Places."
Network Port Configuration
Port number used to access the Netcam(W) over the Internet.
View Network Status
Check the current connection status of the network.
The Common Status is information commonly used for all the
Note
interfaces (Ethernet of PPPoE).
Netcam(W)_SNC-L200(W)
1
Common Status: Display the status
of the Gateway and the DNS.
1
2
LAN Status: Display the status of the
IP address, the Netmask and the Mac
2
address.
3
PPPoE Status: Display the
3
connection status of the
ADSL(PPPoE).
63
Advertisement
Table of Contents
