Ariens Sno-Thro 920 Series Owner's/Operator's Manual page 11

Install Headlight (
(Figure 5)
1. Remove headlight from location under
dash panel. Keep nut for installation.
2. Attach headlight to bolt on right side of
the dash. Fasten with nut removed in
step 1.
3. Plug wire harness into headlight.
.
Light Shipping Location
Remove nut to detach headlight from under
dash. Keep nut to mount light on unit.
Figure 5
920308)
OS8045
Install Discharge Chute
(Figure 6)
1. Grease underside of discharge chute
ring (if not already greased).
2. Remove mounting hardware from the
bottom of the chute pedestal mount.
3. Install discharge chute over opening in
the auger housing and secure pedestal
to auger housing with hardware
removed in step 2.
1. Mounting Hardware
2. Discharge Chute
3. Discharge Chute Ring
4. Chute Pedestal
GB - 11
2
1
3
1
Figure 6
4
OS8050