Precautions - Axis HD264 Instruction Manual

1. Precautions

Storage and Keeping
1. Do not expose the monitor to excessive heat or cold. Storage temperature is -30 ~ +70°C;
Operating temperature is -20 ~ +70°C; Battery operating temperature is 0-70°C; Humidity is Rh90%.
2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or
similar places.
3. Never use this device in environment with excessive moisture, dust or smoke.
4. Avoid dropping or striking.
5. Never use this device in enclosed spaces, areas with excessive vibration or subject to severe
impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 50mm space between the monitor and walls, cabinets or other objects to allow
adequate air circulation around the device.
9. The monitor is not designed to be waterproof.
Operating Precautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
2. Make sure all cables are connected properly. Observe polarity. Improper cable connections may
damage the monitor. Remove the power cable connections when you do not intend to use
the device for an extended period.
1. High voltage is present within the monitor. Opening the monitor case should be done by
professionals.
2. Do not watch video while driving unless you are monitoring rear view camera display.
Occasionally, a few highlights or dark spots may occur on the LCD screen. That is a very common
phenomenon in active matrix display technology, and it does not necessarily indicate any defect
or fault.
Never try to repair this device by yourself. If any problem, please turn off the display at once
and notify our company or authorized dealer. The monitor is a complex device. Any disassembly
or modification may lead to damage and invalidate warranty.
Warning!
Special Notice!
3