Cal Test Electronics CT4447 Series User Manual page 13

CT4447 Series High-Voltage Differential Probes User Manual
Table 1 Key Features
Features
Attenuation Selection
Button & LED Indicators
Power Button
Power and Overload
indicator LED
4 mm Sheathed Banana
Plug Connectors
Insulated BNC Male Output
Connector
USB-C Input Power Port
(on side of probe)
Press the Attenuation selection button to switch between the two
ranges. LED indicator will light green for attenuation selected.
Press to turn unit on.
Press and hold for 5 seconds to turn unit off.
LED will turn green when the unit is on.
LED will turn red when the unit is in voltage overload condiction.
(Dimming of LED may indicate low batteries.)
Connects the probe to the DUT using probe hook pair provided wih the
probe.
The probe's output connect is full insulated and connects directly to an
oscilloscope's BNC female input channel connector.
Use USB-C Power Port to connect with USB cable when powering from
mains adapter or oscilloscope's USB port.
Description
13