Table of Contents
Advertisement
Loudspeaker System Specifications
Pressing in the "Push for DSP" knob will bring up the menu choice for the
Restore function, see Fig. 59.
Fig. 59 Restore Function Menu
Turn the "Push for DSP" knob, and it will change the menu selection from NO to
YES. See Fig. 60.
Fig. 60
If you push in the "Push for DSP" knob now, the unit will restore to Factory
Defaults, and any custom set-up will be lost and have to be re-entered.
In order to assure proper operation, we recommend that the speaker
system be turned OFF, and turned back on again before using it or re-
loading any previously desired settings.
All previously loaded gain settings, Presets, Channel EQ choices, filter settings,
etc., will need to be re-loaded into the speaker system after a Factory Reset
event.
Normally, each time a change is made to the speaker system, whether it is the
Preset used, or the Location, or the Bluetooth® system, it will be saved, and on
powering the speaker system back ON, those settings will automatically come
back up. Using the Restore function can be helpful if someone has altered the
settings such that the speaker system will not function normally, or the files have
become corrupted due to a power spike, a brown-out, etc.
TROUBLESHOOTING
36
Advertisement
Table of Contents
