Peavey PVXp 12 Bluetooth Operating Manual page 29

Loudspeaker System Specifications
Fig. 35 App Control On highlighted
 "Off" disconnects the speaker from App control and resets the internal
DSP gains to 0 dB on the Gain slider. Rotate the "Push for DSP" knob
CW to select the Off parameter, and then push it in. See Fig. 36
Fig. 36 App Control Off highlighted
The App Control is now Off, and the PVX™p speaker system is operating
without any outside control by a Bluetooth® device. Certain Bluetooth®
operations can still be performed using the PVX™p speaker system's controls.
 "Secondary" allows the speaker to be controlled by the app when two
speakers are linked. The secondary speaker will be the Right speaker in
this setup. See complete instructions in the "Linking Speakers" section.
Rotate the "Push for DSP" knob CW to select the Secondary parameter,
and then push it in. See Fig. 37
Fig. 37 App Control Secondary parameter highlighted
Streaming
There are two available settings, "On" or "Off". It should be set to "On" to enable
the speaker to receive audio from a handheld Bluetooth® device.
28