Sign Out Of Wifi (Reset To Factory Settings); Setting Up Con@Ctivity; Activating Con@Ctivity 3.0 Via The Home Wifi Network; Activating Con@Ctivity 3.0 Via A Direct Wifi Connection - Miele DAH 2660 Operating And Installation Instructions

Commissioning
Sign out of WiFi (reset to factory
settings)
To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.
 Hold down the 1 control and then
press and hold the lighting control 
for approx. 2 seconds at the same
time.
If a WiFi connection exists, 2 and 3 will
light up constantly.
 Touch 1.
2 will light up constantly, 3 will flash.
After a few seconds, 2 and 3 will flash.
The connection has now been
disconnected.
 Confirm your choice with the On/Off
switch .
The WiFi connection has now been
disconnected. A new connection can
now be set up.
20

Setting up Con@ctivity

Activating Con@ctivity 3.0 via the
home WiFi network
Requirements:
- Home WiFi network
- WiFi-enabled Miele hob
 Connect the cooker hood and hob to
your home WiFi network (see "Setting
up Miele@home").
The Con@ctivity function will be
activated automatically.
Activating Con@ctivity 3.0 via a direct
WiFi connection
Rather than connecting to the home
network, you can establish a direct
connection between the hob and the
cooker hood.
Requirements:
- WiFi-enabled Miele hob
 Hold down the B control and then
press and hold the 1 control for
approx. 2 seconds at the same time.
2 will light up constantly, 3 will flash.
The cooker hood will be ready for
connection for the next 10 minutes.
 Start the WiFi connection on the hob.
For further details, see the hob
operating instructions.
When successfully connected, 2 and 3
will light up constantly.
 Confirm your choice with the On/Off
switch .
If it is not possible to connect, 2 and 3
flash or the cooker hood cancels the
process.