Toro 07320 Installation Instructions Manual page 5

4
Installing the Floor Mounts
Parts needed for this procedure:
2 Floor mount
6 Nut (3/8 inch)
4 Bolt (3/8 x 1 inch)
2 Bolt (5/16 inch)
2 Nut (5/16 inch)
2 Bolt (3/8 x 7/8 inch)
2 Washer
Procedure
1. Secure the floor panels to the frame as shown
in Figure 3.
1. Bolt (5/16 inch)
2. Bolt (3/8 x 7/8 inch)
3. Washer
4. Nut (5/16 inch)
2. Torque the 2 bolts (3/8 x 7/8 inch) and 4 bolts
(3/8 x 1 inch) to 37 to 45 N∙m (27 to 33 ft-lb).
3. Torque the 2 bolts (5/16 inch) to 1978 to 2543
N∙cm (175 to 225 in-lb).
Figure 3
5. Nut (3/8 inch)
6. Bolt (3/8 x 1 inch)
7. Nut (3/8 inch)
5
Installing the Cab Frame
Parts needed for this procedure:
1 Cab frame
4 Bolts (3/8 x 7/8 inch)
10 Bolt (3/8 x 3/4 inch)
10 Nuts (3/8 inch)
Procedure
Lift the cab frame using the lifting points and place it
on the machine
1. Lifting points
Secure the frame to the machine using 10 bolts (3/8
x 3/4 inch), 10 nuts (3/8 inch), and 4 bolts (3/8 x 7/8
inch) as shown in
g026277
1
g026425
1. Bolt (3/8 x 7/8 inch)
Torque the bolts to 37 to 45 N∙m (27 to 33 ft-lb).
5
(Figure 4).
Figure 4
Figure 5.
Figure 5
g026497
g026497
g026425