Table of Contents
Advertisement
Menu functions
•
AM/PM: select AM or PM in 12-hour format.
•
Repeat: select a repeat unit.
•
Alarm tone: select an alarm tone.
3. Press <Save>.
Stopping an alarm
•
For a non-wake-up alarm, press any key.
•
For a wake-up call alarm, press <Confirm> or
[
].
Press any key, except <Confirm> and [
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
PIM sync
(Menu 3.6)
Use this menu to synchronise personal data with
corresponding PC applications via the optional
WideSync program.
40
Creating a synchronisation profile
1. Press <Add>.
2. Specify the following information for the profile:
•
Profile name: enter the profile name.
•
Sync category: select the applications you
want to synchronise.
•
Sync type: select a synchronisation type.
•
Sync protocol: select a connection method.
3. Press <Save> to save the profile.
], and
Starting synchronisation
1. Make sure that your PC has MS Outlook and the
WideSync program installed, and the phone and
the PC are connected by a USB cable or an active
Bluetooth connection.
On.
2. Open MS Outlook.
3. From the PIM sync screen, select a profile.
4. Press [
].
Advertisement
Table of Contents
