Table of Contents
Advertisement
Alarm
(Menu 3.5)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound setting.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option.
•
Alarm: activate the alarm.
•
Alarm time: enter the time for the alarm to
ring.
•
AM/PM: select AM or PM in 12-hour format.
•
Repeat: select a repeat unit.
•
Alarm tone: select an alarm tone.
3. Press <Save>.
Stopping an alarm
•
For a non-wake-up alarm, press any key.
•
For a wake-up call alarm, press <Confirm> or
[
].
Press any key, except <Confirm> and [
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
PIM sync
(Menu 3.6)
Use this menu to synchronise personal data with
corresponding PC applications via the optional
WideSync program.
Creating a synchronisation profile
1. Press <Add>.
2. Specify the following information for the profile:
•
Profile name: enter the profile name.
•
Sync category: select the applications you
want to synchronise.
•
Sync type: select a synchronisation type.
•
Sync protocol: select a connection method.
], and
43
Advertisement
Table of Contents
