Table of Contents
Advertisement
Reply path: allow the recipient to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to
Uni-code if you enter a Unicode character. Use of
Unicode encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides the
Automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
•
Current profile: select an SMS setting profile.
•
Profile settings: set the properties of each
profile.
Service centre: store or change the number of
your SMS server.
Default destination: enter the default
destination.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
Multimedia message
You can configure default MMS settings.
•
Sending settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when a message has been delivered.
Hide address: set your address to be hidden from
the recipient's phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry date: set the length of time messages are
stored in the MMS server.
(Menu 5.5.2)
53
Advertisement
Table of Contents
