Extension Cord - eisenblatter VARILEX WSF 1800 Original Instructions Manual

EXTENSION CORD

When an extension cord is required, use one that is
suffi cient for the power requirement of the tool. Extension
cords of inadequate wire size cause a serious drop in
voltage, loss of power and possible motor damage. To limit
line voltage drop to a safe level, refer to the following table:
Length in meters 8
Length in feet 25
Wire size AWG 14
NOTE: Extension cords that are used outdoors must be
approved for outdoor use.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always wear goggles when using the machine.
Always disconnect the plug from the socket
before carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that have
reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
Double insulated electric tool
n Rated speed
min Revolutions per minute
-1
~ Alternating current
Hz Herz
A Amperes
ø Wheel capacity
V Volt
W Watts
EurAsian Conformity Mark
414 794 - Varilex-WSF1800_16_Sprachen.indd 29 414 794 - Varilex-WSF1800_16_Sprachen.indd 29
15 23 30
50 75 100
14 12 10
ENGLISH 29
05.05.2020 09:16:31 05.05.2020 09:16:31