Protection Against Electric Shock; Preventing Burns And Scalds - NUK 10.256.377 Operating Instructions Manual

1.4

Protection against electric shock

Warning! The following safety instructions are intended to protect you
from electric shock.
• If the device is damaged, it must not be used under any circumstances. Only have the
device repaired by qualified specialists. Contact the manufacturer for this purpose.
• Only parts which correspond to the original device data must be used for repairs.
• In the event of any malfunction, the device may only be repaired by authorized
specialists.
• Never touch the device, the power cord or the mains plug with wet hands.
• Always remove the power cord by the plug. Never pull on the power cord.
• Ensure that the power cord is never kinked or crushed.
1.5

Preventing burns and scalds

Warning! Hot surfaces can lead to burns, so:
• Never touch the inside of the device during operation. Always wait until the
device has cooled down.
• The device emits hot steam during operation. Avoid skin contact. Keep your face
and hands a safe distance away.
• We recommend not moving the device during operation.
• Always allow the device to cool down before cleaning it.
23