N-Com SPCOM00000026 Quick Start Manual

SPCOM00000026
Fig. 1
Fig. 4
Fig. 6
ENGLISH
INSTRUCTIONS FOR REPLACING THE SPCOM00000026
1. Remove the N-Com system from the helmet (see instruction booklet).
2. Open the e-box, unscrew the screw and remove the connector cover (Fig. 1-3).
3. Disconnect the antenna connector (Fig. 4-5).
4. Place the new antenna inside the plastic box (e-box) (Fig. 6).
5. Connect the new antenna.
6. Screw the connector cover back in place.
7. Close the e-box (Fig. 7).
8. Reposition the N-Com system inside the helmet (see instruction booklet).
SPCOM00000026
Fig. 2
-----------------------------------------------------------------
Fig. 3
Fig. 5
Fig. 7
1