Electrical Specification; Indicator & Connector - Delta HEH080AB Specification And Manual

Part no.:
Delta model no.: HEH080AB

2 Electrical Specification

2-1. Indicator & Connector
 Power Supply Connector
Power input: AC power input with blade terminal.
(1) AC Power Connect
Heater starts to heating point
(2) Electrical connection
Power input: Terminal block 2P with AC L & N input.
(Mate with AWG 12~28 300V 20A)
*Thermostat (panel): setting range: -20~40°C
(Heater starts to heating point,
Tolerance 5°C,
Fuse: Cut-out temperature: 167°C
Note: DC Fan is powered by adapter (AC/DC convert).
The on/off temperature by user to setup
*
Startup average current and inrush current：

The startup average and inrush current waveform are defined as bellow table.
These test are all finished at ambient 25˚C at 115Vac.
Tested waveform to startup average current and inrush current.
Item Current and time
Typical current: 20.5A
Duration Time: 280usec
Measuring methods:
Inrush
Power on AC input then
current
measure the peak current
value.
：
：
Switching off difference
Page 11
7±4°C)
Wave form